Van’s RV-12 Charging System Refresh: B&C Voltage Regulator

The charging system on a stock Rotax 912 engine isn’t exactly a powerhouse to begin with and that makes having a reliable and good performing voltage regulator a necessity. Wichita, Kansas-based B&C Specialty Products is arguably a leader in aftermarket charging system components, and it offers a worthy upgrade for Rotax engines on legacy Van’s RV-12 kits and others with the AVC-1 solid state voltage regulator. We put the accessory to the test in the Experimental Aviator and found that it outperforms the unit supplied in the legacy kit.

Larry Anglisano
Larry Anglisano
Larry Anglisano is editor of Smart Aviator and Instrument Aviator. He is an active land, sea, and glider pilot with over 25 years experience as an avionics specialist.

SIGN UP FOR OUR NEWSLETTER

Latest
Related

6 COMMENTS

Subscribe to this comment thread
Notify of
guest
6 Comments
Oldest
Newest
OldDPE
OldDPE
16 days ago

I can echo Larry’s statement about B&C’s quality and support. 20 years on, both VRs, and the SD20 standby alt are working flawlessly. I replaced the original L60 that lasted 17 years with an LX60. B&C shines with its reliably accessible tech support. They also offer a dizzying array of toggle switches that cover every conceivable application. A great company.

Storaasli
Storaasli
16 days ago

Any word if these a similar product will be available for the 3 phase generators in the 912is and 916is?

Charles Brown
Charles Brown
11 days ago

I’ve been flying with a B&C backup alternator and regulator since 2011. Neither unit had any problems. On two occasions when I called with questions, they were right there with good solid inputs. I visited their business 2 years ago and all I can say is, I wish every business in aviation were just like B&C.

Gwen Walcott
Gwen Walcott
11 days ago

The original Ducati unit that came with the original design was pure junk. The Silent Hektik that replaced it was a good alternative, but mine still gave out after about 4 years. The B&C, however is a demonstrably superior unit to both of the previous units

Steve Jahr
Steve Jahr
11 days ago

I was looking for some definitive data on the improvement. Does the voltage come up at an earlier RPM? Does the output somehow increase? Or design features that specifically improve reliability such as stator current limiting? The only thing I heard was a subjective “it’s better”.

The burnt connector was not the result of “shorting out” as stated. Many do not appreciate the special requirements of the high power continuous operation portions of the electrical system. Those terminals are rated for a maximum current and, based on the burnt look, those ratings were being exceeded. Any resistance in the connection interacts with the square (as in I*I) of the current to create Watts of heating. At 20A that works out to 400x the resistance in Watts so even a small resistance gets hot. Circuits at this power level need larger terminals and preferably bolted connection terminals.

Note this concept also applies to ground circuits.