Swift Fuels announced Tuesday that the approved model list for STCs for its 100R unleaded avgas has been expanded to about 1,200 engines and 1,600 airframes on the U.S. registry. This includes engine STCs for over 1,200 piston engine models from over 80 piston engine OEMs including Lycoming (~395 models), Continental (~195 models), Curtis Wright (95 models), Pratt & Whitney (95 models) and many more, the company said in a news release. GAMI’s G100 UL is approved for virtually all certified aircraft engines and airframes (except helicopters) but Swift says 100R “complies with an ASTM International approved “Production Specification” (D8603).” Swift says the list represents the aircraft that now use 56% of 100LL and is the first phase of the approval.
Swift said the AML expansion means it will go ahead with expanded availability of the fuel at dozens of airports in the U.S. and in other countries. Those who want to legally use the fuel must buy an STC from Swift, but those who have already bought an STC for its UL94 fuel will get the 100R STC for free under the company’s Forever STC program. The new high-octane fuel will replace UL94 as production ramps up. Swift will be conducting a forum on its fuel at 1 p.m. next Monday at Forum 11 at AirVenture.


Can you provide a link to the AML?
chrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/https://csobeech.com/files/SwiftFuel_100R_AML.pdf
https://csobeech.com/files/SwiftFuel_100R_AML.pdf
Russ did, John. It’s a hyperlink in the Swift doc. But here you go: https://www.swiftfuelsavgas.com/assets/users/general/SA04652CH_AML.pdf
Thanks. I could not get the link to open on the Swift doc.
Meanwhile, the FAA continues its search for lead free 100 Octane Fuel Unicorn.
Great news! Been flying on UL94 for a number of years now with zero problems on a C85-12 Continental. Technical support from Swift has been great.
Autogas would likely be just as suitable. I ran a Cessna 140 on it for 11 years.
No Rotax 912? Those would seem to be both numerous and low-hanging fruit.
But they’re not subject to STCs
True for the numerous experimental or LSA applications. However each Rotax model has a fully certified counterpart. A 912 ULS becomes a 912S in my certificated aircraft, for example. Their newer fuel-injected engines are split into two categories, 91x-IS for uncertified and 91x-ISC for certified. Tecnam 2006t and Diamond DA-20 are examples of certified Rotax engines in type certified aircraft.
What about helicopters?
No Enstroms, Robinsons, Guimbals listed in their STC list. There are more than 11,000 Robinsons alone, so it’s not an insignificant segment. (Roughly the same as the number of Mooneys shipped ever).
The press release says that Swift’s 100R is NOT mixable with GAMI’s G100UL. Folks, this is problem. Right now the FAA has approved, via STC, two fuels that are not compatible with each other. No airport is going to sell both. Imagine fueling with G100UL at home, then landing in somewhere that only 100R is available. You’ll have to drain your tanks before refueling. More likely, the two fuels WILL get mixed due to inattention.
Yup, hence the snarky line “due to the presence of solvents reported to damage or disturb aircraft / fuel system components; G100UL also lacks formal ASTM specification approval at this time.”.
Swift’s intent is to force GAMI out by playing the ASTM card and hyping the dubious G100UL damage reports. Producers/distributors also will not want to have two types on the market, in part due to logistics/distribution concerns, e.g., cross contamination of fuel trucks, etc. I suspect that Swift will win – sad for George who went out on a limb for innovation.
Until the inevitable “100R caused X damage to my aircraft” reports start coming in (regardless if they are founded or not). Swift is kidding themselves if they think an ASTM spec is going to protect them from similar claims that G100UL has received.
Agree. And I wonder what “minimal valve recession” looks like.
You are right, it will happen. It would be helpful to know what happens when they do mix!
Once again. What does an EAB builder do to use the fuel?
As an EAB builder, you have several choices. I’m facing the same thing with my Bearhawk build using a tricked out, non-certified overhauled Lycoming IO-540-D4A5.
1) if you are using a Certified engine and want to maintain that you are using a certified engine for resale purposes, then you need the STC.
2) if you are using a former Certified engine (like me), but have modified it, which is allowed, it is now an experimental engine and you can run whatever fuel you want, irrespective of what Lycoming / Continental say. BUT if the engine falls apart because of your choice, the responsibility falls on you. Just like anything else on our experimental airplanes.
3) You could of course be using an experimental engine out of the gate, i.e. volkswagon or subaru engine. Again, you are free to use whatever fuel you need.
There’s no one at the FBO that is checking if you have an STC to use the fuel. Just like AD’s, STC’s only applied to certified aircraft running certified engines.
I didn’t realize the fuel STCs are on the “honor system”. I’ll be using a non cert Rotax. Thanks for the info!
Interesting the STC supports the Lycoming IO-540 series but not the Continental IO-550 equivalent series. Also no Lycoming IO-580. Seems that < 300hp is the key parameter.
Hopefully the University of North Dakota will resume using the Swift fuel now so there will be even more history and flowage. And then we can find out if the valve seat recession issues with Swift fuel have been eliminated.
…”those who have already bought an STC for its UL94 fuel will get the 100R STC for free under the company’s Forever STC program. The new high-octane fuel will replace UL94 as production ramps up.”
How charitable – they’ll give the 100R STC for free to anyone with the UL94 STC, because the cheaper UL94 will eventually go away and be replaced by 100R.
I don’t understand how they can expect us to buy an STC from them to gain permission to buy / use their fuel . Furthermore I can’t imagine why anyone has bothered to BUY 💸their STC at all , if the FAA is going to require one I’d think they’d give away the STC for free so we’d buy their fuel to give it a try.
So once the FAA in all it magnificent determination decides what will be the officially blessed product will those of us who have not bought in on this STC scam be required to pay the extortion or will we be able to buy whatever is the FAA’s champion just like we buy 100LL currently no STC required?
We’ll have to have the STC until the engine manufacturers’ determine it’s an officially blessed product. Just like any other article installed on an engine, prop, or airframe that it didn’t come certified with.
I understand that, what I don’t understand is why they expect us to PAY them for the privilege of being able to utilize their product they want us to buy from them??
No IO-550s, no Cirruses, no Bonanzas. I’m seeing a lot of planes on this list that could already use UL94. Are they making any progress at all in expanding the envelope beyond planes that could already run on 94 octane? If not, this is all for show.
It’s not nothing, but I am not seeing some of the more powerful engines that require 100LL on the list, and plenty that were fine with UL94. I am curious what is holding that back, because there’s not much point in paying more for the extra octane rating for aircraft that can use 94, and the whole point of the UL100 fuels is to have a solution that can be used in the more powerful engines.