Countersink Microstop Modification for Tight Spaces

Ever had that special row of rivets that needed to be hand countersunk because there wasn’t enough room for the microstop? Modifying the base of a microstop sometimes solves that problem. Pick up a couple of surplus ones at the next airshow and break out the cutoff wheel. Cut half of one side or both sides off, and you have a custom microstop that almost always finds a use in those special spots and gives you a little more stability than hand turning a rivet hole.

Zach Chase
Zach Chasehttps://www.fibertechcomposites.com/
Zach has been mixing resin and vacuum-forming fiberglass structures since Orville and Wilbur first felt the rush of air over the Wright Flyer's wings—or thereabout. He's known as the fiberglass guru among builders of composite airplanes and operates Fibertech Composites in Knoxville, Tennessee. When he's not making composite layups, Zach can be found in the Glasair Aircraft Owners forum helping builders.

SIGN UP FOR OUR NEWSLETTER

Latest
Related
Subscribe to this comment thread
Notify of
guest
0 Comments
Oldest
Newest